TPE Underwater zero buoyancy cable Wire Rov Floating Cable
Waterproof For Submarine
Floating Cable
Application
Floating cable relies on foam core extrusion capabilities to
achieve precise cable buoyancy requirements. It is flexible,
movable, UV-stable, good bendability, and abrasion-resistant and
may be fitted with choice of jackets to achieve resistance
to various chemicals including acids, salt water, oil, and
gasoline. Cable is suited for powering and controlling robotic
cleaning
systems in swimming pools and aquarium facilities as well as marine
applications and submersible environmental pumping systems
Technical data
For continuous use in deep well to supply power to submersible
pumps.
Excellent resistant to moisture, abrasion, grace, oil.
Excellent mechanical & electrical characteristic
Zero buoyancy electricity
Zero buoyancy electricity avoids sinking due to its own weight,
which can cause the burden of various underwater operations. Shen
adopts a special structure, and Tsuji electricity floats on the
surface of the water and can be used as a telescopic towing device
for various diving operations. Zero buoyancy is used for underwater
power, signal transmission or signal control, mainly for underwater
robots, underwater detection, underwater construction, underwater
imaging, underwater monitoring and other underwater operations
machinery.
Product characteristics
Zero buoyancy turtle has good characteristics such as oil
resistance, corrosion resistance, acid and alkali resistance,
seawater resistance, hydrolysis resistance, anti thousand
resistance, high tensile strength, anti corner biting, high safety,
material reduction, and cost reduction.
Application scope: Country
Zero buoyancy avoids sinking due to the weight of Shen himself,
which can cause damage to various underwater operations. Shen
adopts a special structure where Tsuji Shen floats on the surface
of the water and can be extended and retracted for various diving
operations. Commonly used for underwater power, signal transmission
or signal control communication, mainly for underwater robots,
underwater detection, underwater construction, underwater imaging,
underwater monitoring and other underwater operations machinery.
Product Structure
1. Finished product (R-class) DC resistance (in accordance with
GB3956 regulations)
2. Use waterproof insulation material for the mouth and heel cover;
3. Special manufacturing workers;
At 4 ° C, the resistance shall not be less than 50MO/KM;
5. The finished product is subjected to AC 50HZ3.5KV/5min without
wearing.
The commonly used solid buoyancy materials for zero buoyancy cables
are polyurethane foam, copolymer foam and composite foam. Their
characteristics and applications are compared as follows:
1. Polyurethane foam
Characteristics: Density range of 0.05-0.25g/cm3, working depth not
exceeding 200m;
Application: Pipeline floating, mooring buoy, floating ship,
pipeline insulation, hose hanging rope, short-term emergency
floating material;
2. Copolymer foam
Characteristics: Density range of 0.04-0.4g/cm3, working depth not
exceeding 600m;
Applications: ROV floating materials, umbilical floating, pore
filling for large underwater structures, pipeline insulation,
submersible cabin floating materials, underwater buoy systems;
3. Composite foam material
Characteristics: the density range of pure composite foam plastic
is 0.46-0.65g/cm3, the working depth is the full ocean depth, and
the density range of synthetic composite foam plastic is 0.275-
0.56g/cm3, working depth within 4000m;
Application: It is widely used in deepwater fields, such as
buoyancy blocks for riser devices, deepwater ROV buoyancy blocks,
umbilical floating, and deepwater pipeline floating blocks.



- Conductor: multi-strand fine tinned copper wire;
- Insulation: foamed thermoplastic elastomer/TPE/TPV and other materials as the
insulation material of the cable;
- Core wire structure: anti-twist layered structure, grouped gap filling, twisted pair
structure and then layered bundling;
- Tensile reinforcement: Kevlar center or gap filling, and Kevlar tensile braided mesh
layer (customizable as needed)
- Inner sheath: low viscosity strong extrusion inner sheath (customizable)
- Outer sheath: foamed polyurethane material
Company Profile:Wire and cable manufacturer Linke Cable Technology Co., Ltd is a
leading cable supplier in China. In the past over 10 years,
Linke Cable has been focusing on R&D, production and marketing
of wire and cable. Linke provide various cables&custom
cable solutions for all over the world. We are specialized in EV
charging cable, medical cable, silicone cable, spring cable,
braided cable, towlobe cable, UL wire, automotive cable, etc.
At Linke cable, we believe there's a better way to bring better
cables to market. We use an engineer-to-engineer approach
to develop better cables for customers and improve the quality of
one's life.


1. Are you a manufacturer or trading company?
We are a professional manufacturer. We can control your order from
the first begining to the last.
Welcome to visit us. We'll pick you up in Shenzhen.
2. How can I get a sample to test your quality?
The samples are free for you. New clients are expected to pay for
the courier cost.
3. What's your Minimum Order Quantity?
Normally 100m. However, the cable is very heavy.
You'd better order a suitable quantity to avoid the high freight.
Sea transportation is the best option.
4. Can I get a discount?
It depends on your quantity, We can make a discount and afford the
freight. Pls kindly contact us.
5. Does your company accept OEM production?
Yes, could print your company name, we even custom the quality card
to promote your company